CLASS 5 Two Wheel Drive Enduro  - Vehicles with engines up to 6000cc

For more detailed and specific information consult Specific Requirements of Off Road Vehicles in Section 12 of the CAMS Manual of Motor Sport.  For detailed requirements of the General Requirements click here.

BODY
The original silhouette of the body must be retained.
A bullbar may be fitted.
The radiator grille must not be changed and must remain in its original position.
Maximum permitted variation of the wheelbase is plus or minus 3%.
All interior trim is free.
Roof vents may be fitted in the forward third of the roofs.
Windscreen may be replaced by Perspex, Lexan, polycarbonate or zone toughened, shatterproof, laminated glass.
Original front door hinges and latches must be retained.

BRAKING SYSTEM
Brake and braking system are free.
The vehicle must have a dual circuit braking system arranged so that in the event of a leakage at any point in the system the brake pedal shall control two wheels on the same axle.

CHASSIS
Original chassis, monocoque or sub frame must be retained unchanged.
Engine and transmission mounts and cross members may be removed, relocated or refurbished.
Material may be added for any purpose.

ELECTRICAL
Original headlamp position must be retained.
Headlamps must be operable.
Tail lamps and stop lamps must be operational.
A dust lamp must be fitted.

ENGINE/TRANSMISSION
The type and location of the engine is free provided it is located in the same general area as the original.
The original engine/gearbox/final drive configuration in relation to the body must be retained.
Drivetrain components are free.
Drive shafts must contained so they cannot enter the cabin in the event of breakage.

FUEL TANK
Additional or replacement fuel tanks may be fitted provided they are vented to the outside of the vehicle.
A fuel tank must be separated from the occupants by a flame and liquid proof bulkhead.

ROLL CAGE
A roll cage of at least type 3 must be fitted.